NC14

New Cruzzer Motorbike

 New Cruzzer Motorbike

 

NC14

New Cruzzer Motorbike

 The following is the advantage of this ceramic cylinder.

1. The ceramic cylinder honing surface is smooth and harder than the iron sleeve cylinder.

2. The ceramic cylinder releases the heat quicker than the iron sleeve cylinder.

3. The ceramic cylinder is lighter than the iron sleeve cylinder.

NC14

New Cruzzer Motorbike

 The turn signal bracket and front fork cover hide the wiring harness behind the cover.

NC14

New Cruzzer Motorbike

 The taillight bracket cover hides the wiring harness in the bracket.

NC14

New Cruzzer Motorbike

 The mounting makes the speedometer fitting perfect.

NC14

New Cruzzer Motorbike

 Both sides of the front fork have this safe locks for the front wheel installation.

NC14

New Cruzzer Motorbike

On the new frame, we welded a bridge on the upper rear fork for this mounting. This new clutch arm mounting is consisted by a hanging bolt, a plastic spacer and a butterfly nut. Turn the butterfly nut to adjust the tension after the clutch and clutch belt were installed. On the 1999 WC1 bikes, the clutch spring was just hanged on the bridge of an upper rear frok, which was difficult to install and also hurt the painting of the frame.

NC14

New Cruzzer Motorbike

 This speedometer gear has been installed on the front wheel assembly, which needs to adjust the position coordinated with front drum brake arm when install the front wheel assembly to the front fork.

NC14

New Cruzzer Motorbike

 There are 2 hangers for the front fork, left-hand hanger is for the front and rear brake cables and the right-hand hanger is for the speedometer cable.

NC14

New Cruzzer Motorbike

 The mounting brackets have been welded on the frame, which makes the center stand easy to install and stable.

NC14

New Cruzzer Motorbike

 The mounting bracket is welded on the under side of the exhaust pipe, which makes top view of the exhaust pipe installation clear. The mounting bracket of 1999 WC1 exhaust pipe was welded on the upper side of the pipe.

NC14

New Cruzzer Motorbike

 The new front fork has a weld-on bracket for locking the brake arm freely by an alloy steel M6 bolt and a nut. This installation offers better brake perforamce.

NC14

New Cruzzer Motorbike

 The New Cruzzer Motorbike has a centrifugal automatic clutch, which works like motorscooter, just twist and go by throttle. So, the clutch lever on the lefe-hand control can be used by the rear drum brake lever. This rear drum brake offers better brake perforamce than the coaster brake for bike.

NC14

New Cruzzer Motorbike

 This big breather kit is consisted by a breather caninster, copper 3-way adapter, tubes and clips. This kit is allowed to release enough crankcase compression quickly from one outlet at the left-hand side of crankcase and one outlet at the compression releasing plate, which makes the engine working smoothly. This kit is packed by an individual box in the engine box and the engine box will be put in the shipping box of Gas Tank.

www.youtube.com/watch

NC14

New Cruzzer Motorbike

 New Cruzzer Motorbike

NC14

New Cruzzer Motorbike

 New Cruzzer Motorbike

NC14

New Cruzzer Motorbike

 New Cruzzer Motorbike

Back